Redmine: Issueshttps://redmine.auroville.org.in/https://redmine.auroville.org.in/favicon.ico2023-11-22T14:58:45ZRedmine
Redmine GIS - Feature #15270 (New): Record well sensor data (mqtt)https://redmine.auroville.org.in/issues/152702023-11-22T14:58:45ZPhilippe May
<p>Ram (<a class="email" href="mailto:rkris@wisense.in">rkris@wisense.in</a>) has set up a "gateway" to collect well water sensor (to start with).</p>
<p>The mqtt messages arrive directly on the server. See:</p>
<pre>
Sensor data published by the GW to this topic "/v1/telemetry" in JSON format. See example below.
{
"Name":"WSN-0012f82e",
"MacId":"00:12:f8:2e",
"RSSI":-19,
"LQI":13,
"0x78":"2.97",
"0x33":"215.00",
"0x58":"0.40",
"Sequence_number":64
}
</pre> GIS - Bug #15003 (New): Well level trend computation has opposite sign (minus instead of plus, an...https://redmine.auroville.org.in/issues/150032023-04-25T10:18:15ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>The well water level trend computed for each well by subtracting the last reading from the previous one, gives the difference with opposite sign: when the last reading is lower than the previous, the trend should be negative, but it is positive. Viceversa, when it should be positive, it is negative...</p> GIS - Support #14895 (New): Backup the whole serverhttps://redmine.auroville.org.in/issues/148952023-03-18T09:08:20ZPhilippe May
<p>After discussion with Giulio and Tency, we agreed to set in place a backup of the full server on a USB drive.</p> GIS - Support #14762 (New): Rain data of Sri Aurobindo Society Building Pondicherry - Beach Officehttps://redmine.auroville.org.in/issues/147622023-01-11T11:22:36ZSelvarani C
<p>Hi philippe,</p>
<p>As we discussed yesterday.<br />Here below i have attached the rain data of Sri Aurobindo Society Building Pondicherry - Beach Office what they send.<br />The data is from 1st Dec '22 to 9th Jan'23, at 4 hour intervals.</p> GIS - Support #14614 (New): CSR Weather Station not recording data?https://redmine.auroville.org.in/issues/146142022-11-11T04:48:46ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>Dear Philippe,</p>
<p>I noticed that since 9 november at around 2 pm, the CSR weather station did not store any info on rainfall (I did not check other parameters).</p>
<p>I will ask Vijai to check the batteries, as we had a couple of overcast days and perhaps the solar charge of the weather station was not enough...</p>
<p>I think it is better to check also if data have been stored in Ambient Weather server or not.<br />Thanks</p> GIS - Support #14407 (New): UPS received and connectedhttps://redmine.auroville.org.in/issues/144072022-08-20T05:16:45ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>This morning we connected the UPS to the server, as once again last night there was a power cut...<br />Probably you will need to pass by and see if it needs to be configured in a way so that the turning off could be done properly by the UPS itself when the batteries drain out</p> GIS - Feature #14306 (New): Cannot connect from QGishttps://redmine.auroville.org.in/issues/143062022-07-18T09:09:52ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>Today I tried to connect QGis to the PostGIS layers in Gisaf, as usual.<br />But I got the error message as in the attached screenshot</p> GIS - Documentation #13992 (New): Units for Wind speed in automatic weather stationshttps://redmine.auroville.org.in/issues/139922022-04-30T10:24:49ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>Dear Philippe, I came across this webpage which has been recently been set up by Bhuvan, the Indian Geo-Platform of ISRO (as they call themselves)<br /><a class="external" href="https://bhuvan.nrsc.gov.in/nhp/#/et-flux-dashboard">https://bhuvan.nrsc.gov.in/nhp/#/et-flux-dashboard</a><br />They have set up some particular stations for measuring certain parameters, in some locations (you can see the locations on the page)<br />Among other places, they have installed one station at Tindivanam, which is not far from here. I then checked the windspeed as reported in their web page, and compared with our windspeed: the order of magnitude of the reading is quite similar, but their unit is m/s, while our is km/h. Most probably their unit is correct. I checked our reading for yesterday, it was 4: if it is km/h then it is really very low. But if it is m/s then it becomes about 14 km/h which might be quite true.<br />Kindly give it some thought, we might need to re-define the unit...</p> GIS - Bug #13901 (New): Map: style of the category with status 'E' is always applied https://redmine.auroville.org.in/issues/139012022-04-12T05:31:11ZPhilippe May
<p>Taking an example: V-BLDG-SHED has categories for 3 statuses: E, D, F.</p>
<p>But on the map, the style of category "E" is applied for the 3 statuses.</p> GIS - Support #13847 (New): Gisaf not respondinghttps://redmine.auroville.org.in/issues/138472022-03-30T11:49:04ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>Today thee was power cut for the whole day. At a certain point there was not even Internet connection at the office. Then Internet was restored, but Gisaf is still not connecting, and if I press Shift-F5 I get a "502 Bad Gateway - nginx" error message.<br />We tried to switch the server off, and then on again, but to no avail</p>
<p>Kindly help if you can<br />Thanks<br />Giulio</p> GIS - Feature #13597 (New): Courage well: tags to add after publishinghttps://redmine.auroville.org.in/issues/135972022-02-03T11:44:55ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>Courage well: the survey took 3 points on the casing: the three points define a circle (the casing), the center of the circle is a point which needs to be created by Raj, which will have the code of Borewell.<br />Inside the casing there are 2 pipes (from Auroville Water Service), because there are 2 separate pipelines and 2 pumps: during the survey (03.02.2022) one point for each pipe has been measured. When these data will be published, then a tag shall be created for each of these 2 AWS points, describing that these are two separate pipes for separate water distribution</p> GIS - Support #13445 (New): Jupyter notebook for rnoff calculation: kernel not connectinghttps://redmine.auroville.org.in/issues/134452021-12-31T09:32:26ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>Dear Philippe,<br />I tried to re-run the jupyter notebook to update the runoff model with all data from the survey done in the last 2 years.<br />I opened the notebook, and then tried to restart the kernel and then re-run the whole notebook: but it does not work, and the icon in the upper-right corner tells me that the kernel is disconnected, even after trying several times...</p>
<p>Perhaps you can guide me on this...</p>
<p>Thanks</p>
<p>Happy New Year</p>
<p>Giulio</p> GIS - Support #13259 (New): Wrong data from CSR AmbientWeather weather stationhttps://redmine.auroville.org.in/issues/132592021-11-21T11:39:59ZPhilippe May
<p>After working on <a class="issue tracker-1 status-3 priority-4 priority-default" title="Bug: Missing data from AmbientWeather weather stations (Resolved)" href="https://redmine.auroville.org.in/issues/13258">#13258</a>, the rain data for CSR WS in Gisaf should have been updated and show figures of the massive rain pouring yesterday.</p>
<p>But, the rainfall data is stuck at 0, only for that weather station.</p> GIS - Feature #12976 (New): Weather Station not recording data on 3rd October 2021https://redmine.auroville.org.in/issues/129762021-10-04T06:48:29ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>I have just noticed on the CSR weather Station Dashboard that the CSR Weather Station did not record any data other than the pressure, from 6 pm on the 3rd of October 2021, till 8 am on the 4th of October 2021.<br />To Philippe: kindly check if those data can be retrieved and stored into the database.<br />Thanks, Giulio</p> GIS - Support #12850 (New): Mistakenly deleted ticket about PgAdminhttps://redmine.auroville.org.in/issues/128502021-09-07T04:15:26ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>Dear Philippe,<br />I mistakenly deleted the ticket related to the PgAdmin. I am sorry, I clicked on the wrong button, and I don't know how to undo it (if it is ever possible...)</p>
<p>I am very sorry, hope you can recover it</p>
<p>Giulio</p>