Redmine: Issueshttps://redmine.auroville.org.in/https://redmine.auroville.org.in/favicon.ico2023-11-22T14:58:45ZRedmine
Redmine GIS - Feature #15270 (New): Record well sensor data (mqtt)https://redmine.auroville.org.in/issues/152702023-11-22T14:58:45ZPhilippe May
<p>Ram (<a class="email" href="mailto:rkris@wisense.in">rkris@wisense.in</a>) has set up a "gateway" to collect well water sensor (to start with).</p>
<p>The mqtt messages arrive directly on the server. See:</p>
<pre>
Sensor data published by the GW to this topic "/v1/telemetry" in JSON format. See example below.
{
"Name":"WSN-0012f82e",
"MacId":"00:12:f8:2e",
"RSSI":-19,
"LQI":13,
"0x78":"2.97",
"0x33":"215.00",
"0x58":"0.40",
"Sequence_number":64
}
</pre> GIS - Bug #15003 (New): Well level trend computation has opposite sign (minus instead of plus, an...https://redmine.auroville.org.in/issues/150032023-04-25T10:18:15ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>The well water level trend computed for each well by subtracting the last reading from the previous one, gives the difference with opposite sign: when the last reading is lower than the previous, the trend should be negative, but it is positive. Viceversa, when it should be positive, it is negative...</p> GIS - Support #14895 (New): Backup the whole serverhttps://redmine.auroville.org.in/issues/148952023-03-18T09:08:20ZPhilippe May
<p>After discussion with Giulio and Tency, we agreed to set in place a backup of the full server on a USB drive.</p> GIS - Support #14614 (New): CSR Weather Station not recording data?https://redmine.auroville.org.in/issues/146142022-11-11T04:48:46ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>Dear Philippe,</p>
<p>I noticed that since 9 november at around 2 pm, the CSR weather station did not store any info on rainfall (I did not check other parameters).</p>
<p>I will ask Vijai to check the batteries, as we had a couple of overcast days and perhaps the solar charge of the weather station was not enough...</p>
<p>I think it is better to check also if data have been stored in Ambient Weather server or not.<br />Thanks</p> GIS - Support #14407 (New): UPS received and connectedhttps://redmine.auroville.org.in/issues/144072022-08-20T05:16:45ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>This morning we connected the UPS to the server, as once again last night there was a power cut...<br />Probably you will need to pass by and see if it needs to be configured in a way so that the turning off could be done properly by the UPS itself when the batteries drain out</p> GIS - Feature #14306 (New): Cannot connect from QGishttps://redmine.auroville.org.in/issues/143062022-07-18T09:09:52ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>Today I tried to connect QGis to the PostGIS layers in Gisaf, as usual.<br />But I got the error message as in the attached screenshot</p> GIS - Documentation #13992 (New): Units for Wind speed in automatic weather stationshttps://redmine.auroville.org.in/issues/139922022-04-30T10:24:49ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>Dear Philippe, I came across this webpage which has been recently been set up by Bhuvan, the Indian Geo-Platform of ISRO (as they call themselves)<br /><a class="external" href="https://bhuvan.nrsc.gov.in/nhp/#/et-flux-dashboard">https://bhuvan.nrsc.gov.in/nhp/#/et-flux-dashboard</a><br />They have set up some particular stations for measuring certain parameters, in some locations (you can see the locations on the page)<br />Among other places, they have installed one station at Tindivanam, which is not far from here. I then checked the windspeed as reported in their web page, and compared with our windspeed: the order of magnitude of the reading is quite similar, but their unit is m/s, while our is km/h. Most probably their unit is correct. I checked our reading for yesterday, it was 4: if it is km/h then it is really very low. But if it is m/s then it becomes about 14 km/h which might be quite true.<br />Kindly give it some thought, we might need to re-define the unit...</p> GIS - Bug #13901 (New): Map: style of the category with status 'E' is always applied https://redmine.auroville.org.in/issues/139012022-04-12T05:31:11ZPhilippe May
<p>Taking an example: V-BLDG-SHED has categories for 3 statuses: E, D, F.</p>
<p>But on the map, the style of category "E" is applied for the 3 statuses.</p> GIS - Support #13847 (New): Gisaf not respondinghttps://redmine.auroville.org.in/issues/138472022-03-30T11:49:04ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>Today thee was power cut for the whole day. At a certain point there was not even Internet connection at the office. Then Internet was restored, but Gisaf is still not connecting, and if I press Shift-F5 I get a "502 Bad Gateway - nginx" error message.<br />We tried to switch the server off, and then on again, but to no avail</p>
<p>Kindly help if you can<br />Thanks<br />Giulio</p> GIS - Documentation #11448 (New): Meaning of colors for wells in the maphttps://redmine.auroville.org.in/issues/114482020-12-09T11:56:09ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>Wells in the map are represented with different colors: blue, gray, brown, yellow, red.<br />While it is clear that gray means that no monitoring ever happened, and blue means that the well has been monitored for some time, and yellow means that the level iks below sea level, still it remains unclear what is the meaning of red color (see for example in Discipline) and brown color (see Aurovelo, id 76).</p>
<p>There have been people asking for this topic</p> GIS - Support #9736 (New): Enter correct day and time of the measurements of the wellshttps://redmine.auroville.org.in/issues/97362020-02-18T11:53:25ZPhilippe May
<p>All recent times of monitoring of the well levels show around 4 to 5 PM.</p>
<p>This shows that you don't enter the time when you took the levels, but the time when you entered the value in the system. Also and more importantly, we even lose the day when you measured if you enter don't enter the levels that same day!</p>
<p>It's important to put proper the information there! From now on, please be careful.</p>
<p>Also, can you correct all the records with wrong information?</p> GIS - Task #8303 (New): Health check up residential zone (Priority 1 list)https://redmine.auroville.org.in/issues/83032019-05-14T05:59:18ZMeera Natarajan
<ul>
<li>Arati,Invocation,Surrender</li>
<li>Creativity</li>
<li>Kailash</li>
<li>Luminosity</li>
<li>Madhuca</li>
<li>Prarthna 1</li>
<li>Prarthna 2</li>
<li>Progress</li>
<li>Sukhavati</li>
<li>Surrender Youth house</li>
<li>Vikas</li>
</ul> GIS - Task #7913 (New): Editing to be done in GISAFhttps://redmine.auroville.org.in/issues/79132019-03-15T09:12:11ZPavneet Kaurkaur.pavneet22@gmail.com
<p>A few issues have piled up for editing in GISAF, this is to link them together</p> GIS - Feature #7776 (New): Text on IZ CAD filehttps://redmine.auroville.org.in/issues/77762019-02-26T07:27:53ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>Dear Pavneet,<br />I saw that there is a text in the IZ CAD file which says "fence to be changed" <br />Are you aware of it?<br />We can look at it together</p>
<p>Regards</p>
<p>Giulio</p> GIS - Task #7746 (New): Sacred Groves wellhttps://redmine.auroville.org.in/issues/77462019-02-22T07:06:31ZGiulio Di Anastasiogiulioenrica@gmail.com
<p>Dear Bala,<br />it looks like there is a new well in Sacred Groves, I checked on our Gisaf but I did not see any well there.<br />Can you please go there and check it? Please take also the position with GPS, and photo.<br />Try to understand also if there are reports on this well (depth, casing, slots, date of drilling) or who has the report.</p>
<p>Please let me know</p>
<p>Thanks<br />Giulio</p>