AONT1443¶

• AONT1443
  • Steps:
    • ACN

Steps:¶

• Power on the AONT.
• Connect the AONT with a system using an Ethernet patch cable on the LAN port of the AONT.
• Open any Internet Browser on the system.
• Type the following IP on the URL 192.168.1.1.
• In the pop-up window, enter User Name as admin and Password as system.
• Then the Web interface of the router will allow you to modify and edit the Router's settings.

The aboves are the same for both ACN and BSNL setup:

ACN¶

• Select WAN Connection Type
  • Choose the static IP
  • Update the IP: 10.20.40.**
  • Update the netmast: 255.255.255.0
  • Update the Gateway : 10.20.40.1
  • Update the Primary DNS: 192.168.8.55
  • Update the secondary DNS:192.168.8.56
  • Click Next.

• Wireless:
  • Network Name(SSID) - **
  • Password - ** (it should be more then seven characters)
  • Click Next.

• Confirm your settings.
  • Click Save.

Wait for the router to reboot.

• Click Finish.

Note: For Remote ACCESS

• Click Advance:
  • Firewall ---> Disable the WAN Blocking option
• Click Save
  Note: For ACN connection give the static ip (Ex:10.20.40.201) in the browser and access the WAN page as remotely and BSNL connection create one IPHost service(for VOIP) and give that IPhost IP (10.20.41.23) n the browser and access the WAN page as remotely

BSNL
Select WAN Connection Type

• Choose the PPOE
• Update the Username: XXXXXXXXXX
• Update the Password: XXXXXXXXXX
• Click Apply and Save.