AONT1444¶

• AONT1444
  • Steps:
    • WAN Configurations:
    • WLAN/Wifi Configurations:
    • Image of the Steps for Configurations:

Steps:¶

1. Power on the optical modem(ASEE 1444).
2. Connect the optical modem(ASEE 1444) with a system using an Ethernet patch cable on the LAN port of the optical modem(ASEE 1444) OR connect Via optical modem(ASEE 1444)_Wifi.
3. Open any Internet Browser on the system.
4. Type the following IP on the URL 192.168.1.1.
5. In the pop-up window, enter User Name as admin and Password as system.
6. The Web interface of the router will allow you to modify and edit the optical modem's settings.

WAN Configurations:¶

1. Select WAN Connection Type:
   • Change Channel Mode to IPoE from Bridged.
   • Go to WAN IP Settings which is on the same page.
   • Update the Local IP Address: 10.20.4.***
   • Update the Remote IP Address/Gateway: 10.20.4.1*
   • Update the Subnet mask: 255.255.255.0
   • Update the Primary DNS: 192.168.8.55
   • Update the secondary DNS: 192.168.8.56
   • Click Apply Changes.

WLAN/Wifi Configurations:¶

1. Select WLAN.

• Select wlan0 (5GHz).
  • Select Basic Settings to change the wifi name.
  • On SSID (fill in the wifi name) - **
  • Click Apply Changes to save the WiFi name.
  • Select Security for password insert.
  • Click on Encryption to change the various modes of encryption.
  • Select WPA2 for iPhone & Apple devices or WPA2+WPA3 Mixed for Android devices
  • Select Pre-Shared Key to insert password - ** (It should be more than seven characters)
  • Click Apply Changes.

• Select wlan1 (2.4GHz).
  • Select Basic Settings to change the wifi name.
  • On SSID (fill in the wifi name) - **
  • Click Apply Changes to save the WiFi name.
  • Select Security for password insert.
  • Click on Encryption to change the various modes of encryption.
  • Select WPA2 for iPhone & Apple devices or WPA2+WPA3 Mixed for Android devices
  • Select Pre-Shared Key to insert password - ** (It should be more than seven characters)
  • Click Apply Changes.

Reboot/Power cycle after optical modem(ASEE 1444) configuration is done before using it.

Logout of the optical modem(ASEE 1444).

OK: logout successfully! message will pop up.

Note: Encryption is the process of encoding messages or information so that only authorized parties can read it.

Image of the Steps for Configurations:¶