Steps to check AVES EPM connectivity » History » Version 11
Version 10 (Atchuthan Manickam , 18/01/2021 13:35) → Version 11/12 (Atchuthan Manickam , 20/01/2021 10:31)
h2. Steps to check Aurinoco Connection at AVES EPM and Solar Monitoring Sites
*Steps for AVES & Varuna*
# Do a ping test from office with the IP address allocated for the EPM.
# Send a message that something is going wrong at the EPM location(For our awareness).
# Still go to the site.
# Check LED lights on the AONT and MC (Media Convertor).
# If AONT/MC LED not blinking then check the electrical power.
# If AONT GPON LED is red or flickering then take a picture and contact [[FAQ:How to contact Aurinoco?|Aurinoco support]].
# Check if all the LED of MC (100 Mbps - all 6 LED will blink & for 1G - 5 LED will blink) are blinking and if not then take a picture and contact [[FAQ:How to contact Aurinoco?|Aurinoco support]].
# Check the WiFi connectivity.
# If connected then do a ping test once again.
# If WiFi connectivity is not available then unplug and plug again Ethernet cable as well as reboot the AONT & MC.
# After this AONT or MC or Router not working then send an email to [[FAQ:How to contact Aurinoco?|Aurinoco support]] with issue description.
# Attach the pictures with the email.
# Acknowledgment email will be sent by Aurinoco Support regarding the issue.
# Then Aurinoco support will create an issue and assign it to Network Team.
*Overall Steps*
* *Check the electrical power source at site, either TNEB or UPS. Recommend to use networking devices on UPS*
*Checking * Checking LED indicators on AONT (Alphion Optic Network Terminal):* Terminal) :
# Green light on - PWR, PON and LAN indicates operational state
# Red light on - LOS indicates Loss of signal from source - Contact [[FAQ:How to contact Aurinoco?|Aurinoco support]]
# Red light or flickering green light on PWR - indicates issue with power adapter or electric source
# Check input voltage on power adapter and report to [[FAQ:How to contact Aurinoco?|Aurinoco support]] if failed
*Check * Check LED indicators on MC (Media Convertor)* Convertor)
# Green light on - PWR, fdx, fx, tx, 100mbps indicates operational state
# Stable Green light on PWR alone indicates no connectivity - Contact [[FAQ:How to contact Aurinoco?|Aurinoco support]]
# Flickering Green light on PWR indicates issue with power adapter or electric source.
# Check input voltage on power adapter and report to [[FAQ:How to contact Aurinoco?|Aurinoco support]] if failed
# Check the electrical power source at site, either TNEB or UPS. Recommend to use networking devices on UPS
*Check * Check LED indicators on Router (D-Link or TP-Link)* TP-Link)
# Green light on - Internet, Power, WiFi and LAN (if Ethernet cable connected) indicates operational state
# Red light on Internet LED indicates no internet connection from MC or AONT
# Check physical connectivity between router and MC or AONT
# Check input voltage on power adapter and report to [[FAQ:How to contact Aurinoco?|Aurinoco support]] if failed
# Check the electrical power source at site, either TNEB or UPS. Recommend to use networking devices on UPS
*Do * Do a ping test from AVES network to the respective site's IP address* address
# Open cmd (on Windows machine) or terminal (on Linux systems)
# Run command | ping 192.168.16.XXX ([[AVES-EPM&SOL-IP-List|EPM IP addresses]])
# Send an email to [[FAQ:How to contact Aurinoco?|Aurinoco support]] with the ping test results and an issue description.
*Steps for AVES & Varuna*
# Go to the site.
# Check LED lights on the AONT and MC (Media Convertor).
# If AONT/MC LED not blinking then check the electrical power.
# If AONT GPON LED is red or flickering then take a picture and contact [[FAQ:How to contact Aurinoco?|Aurinoco support]].
# Check if all the LED of MC (100 Mbps - all 6 LED will blink & for 1G - 5 LED will blink) are blinking and if not then take a picture and contact [[FAQ:How to contact Aurinoco?|Aurinoco support]].
# Check the WiFi connectivity.
# If connected then do a ping test.
# If WiFi connectivity is not available then unplug and plug again Ethernet cable as well as reboot the AONT & MC.
# After this AONT or MC or Router not working then send an email to [[FAQ:How to contact Aurinoco?|Aurinoco support]] with issue description.
# Attach the pictures with the email.
# Acknowledgment email will be sent by Aurinoco Support regarding the issue.
# Then Aurinoco support will create an issue and assign it to Network Team.
*Steps for AVES & Varuna*
# Do a ping test from office with the IP address allocated for the EPM.
# Send a message that something is going wrong at the EPM location(For our awareness).
# Still go to the site.
# Check LED lights on the AONT and MC (Media Convertor).
# If AONT/MC LED not blinking then check the electrical power.
# If AONT GPON LED is red or flickering then take a picture and contact [[FAQ:How to contact Aurinoco?|Aurinoco support]].
# Check if all the LED of MC (100 Mbps - all 6 LED will blink & for 1G - 5 LED will blink) are blinking and if not then take a picture and contact [[FAQ:How to contact Aurinoco?|Aurinoco support]].
# Check the WiFi connectivity.
# If connected then do a ping test once again.
# If WiFi connectivity is not available then unplug and plug again Ethernet cable as well as reboot the AONT & MC.
# After this AONT or MC or Router not working then send an email to [[FAQ:How to contact Aurinoco?|Aurinoco support]] with issue description.
# Attach the pictures with the email.
# Acknowledgment email will be sent by Aurinoco Support regarding the issue.
# Then Aurinoco support will create an issue and assign it to Network Team.
*Overall Steps*
* *Check the electrical power source at site, either TNEB or UPS. Recommend to use networking devices on UPS*
*Checking * Checking LED indicators on AONT (Alphion Optic Network Terminal):* Terminal) :
# Green light on - PWR, PON and LAN indicates operational state
# Red light on - LOS indicates Loss of signal from source - Contact [[FAQ:How to contact Aurinoco?|Aurinoco support]]
# Red light or flickering green light on PWR - indicates issue with power adapter or electric source
# Check input voltage on power adapter and report to [[FAQ:How to contact Aurinoco?|Aurinoco support]] if failed
*Check * Check LED indicators on MC (Media Convertor)* Convertor)
# Green light on - PWR, fdx, fx, tx, 100mbps indicates operational state
# Stable Green light on PWR alone indicates no connectivity - Contact [[FAQ:How to contact Aurinoco?|Aurinoco support]]
# Flickering Green light on PWR indicates issue with power adapter or electric source.
# Check input voltage on power adapter and report to [[FAQ:How to contact Aurinoco?|Aurinoco support]] if failed
# Check the electrical power source at site, either TNEB or UPS. Recommend to use networking devices on UPS
*Check * Check LED indicators on Router (D-Link or TP-Link)* TP-Link)
# Green light on - Internet, Power, WiFi and LAN (if Ethernet cable connected) indicates operational state
# Red light on Internet LED indicates no internet connection from MC or AONT
# Check physical connectivity between router and MC or AONT
# Check input voltage on power adapter and report to [[FAQ:How to contact Aurinoco?|Aurinoco support]] if failed
# Check the electrical power source at site, either TNEB or UPS. Recommend to use networking devices on UPS
*Do * Do a ping test from AVES network to the respective site's IP address* address
# Open cmd (on Windows machine) or terminal (on Linux systems)
# Run command | ping 192.168.16.XXX ([[AVES-EPM&SOL-IP-List|EPM IP addresses]])
# Send an email to [[FAQ:How to contact Aurinoco?|Aurinoco support]] with the ping test results and an issue description.
*Steps for AVES & Varuna*
# Go to the site.
# Check LED lights on the AONT and MC (Media Convertor).
# If AONT/MC LED not blinking then check the electrical power.
# If AONT GPON LED is red or flickering then take a picture and contact [[FAQ:How to contact Aurinoco?|Aurinoco support]].
# Check if all the LED of MC (100 Mbps - all 6 LED will blink & for 1G - 5 LED will blink) are blinking and if not then take a picture and contact [[FAQ:How to contact Aurinoco?|Aurinoco support]].
# Check the WiFi connectivity.
# If connected then do a ping test.
# If WiFi connectivity is not available then unplug and plug again Ethernet cable as well as reboot the AONT & MC.
# After this AONT or MC or Router not working then send an email to [[FAQ:How to contact Aurinoco?|Aurinoco support]] with issue description.
# Attach the pictures with the email.
# Acknowledgment email will be sent by Aurinoco Support regarding the issue.
# Then Aurinoco support will create an issue and assign it to Network Team.