TP-Link Router - TL-WR841HP High-Power Wireless-N Router¶

Steps:

• Power on the wifi Router
• Connect the wifi router with a system using an Ethernet patch cable on the LAN port of the router
• Open the Internet Browser on the system
• Type the following IP on the URL 192.168.0.1(usually provided bottom of the Router)
• Then a pop up will come and ask you an User Name and Password
• Type a User Name : admin and The Password : admin (provided bottom of the Router)
• Then the Web interface of the router will allow you to modify and edit the Router's settings

• On the Right top ---> Network ---> WAN
  • choose the static ip
  • update the IP: 10.20.210.**
  • update the netmast: 255.255.255.0
  • update the Gateway : 10.20.210.1
  • update the Primary DNS: 192.168.8.55
  • update the secondary DNS:192.168.8.56

• click Apply/save

• check the DHCP is Enable(Default it will be Enable)
  • On the Right top ---> Wirless
  • Change the SSID : Dustudio-optic(for example)
  • Change the Region : india
  • Bandwidth and Channel : Auto (if there is an other router has a same channel then we need to choose the channel, other wise it will remain Auto)

• click Apply/save

• On the Right top--->Wireless --->Wireless security

• Update or give the password: ** (it should be more then seven characters)

• Click Apply/save

• Logout

• Then connect a WIFI Router with a ONT using a Ethernet Patch cable on the WAN port of the router
• you will see the Internet light will blink initially RED, After a couple of seconds it will be Green on the router

Note: For Remote ACCESS

• On the Right side --->Security --->Remote management
  • Web Management Port : 8000
  • Remote Management IP Address: 255.255.255.255

• Click Save