FAQ

h1. AONT1443

{{toc}}

h2. Steps:

* Power on the AONT.
* Connect the AONT with a system using an Ethernet patch cable on the *LAN* port of the AONT.
* Open any Internet Browser on the system.
* Type the following IP on the URL *192.168.1.1*.
* In the pop-up window, enter User Name as *admin* and Password as *system*.
* Then the Web interface of the router will allow you to modify and edit the Router's settings.

*The aboves are the same for both ACN and BSNL setup:*

h3. ACN

* Select WAN Connection Type
** Choose the static IP
** Update the IP: 10.20.40.**
** Update the netmast: 255.255.255.0
** Update the Gateway : 10.20.40.1
** Update the Primary DNS: 192.168.8.55
** Update the secondary DNS:192.168.8.56
** Click Next.

* Wireless:
** Network Name(SSID) - ******
** Password - ****** (it should be more then seven characters)
** Click Next.

* Confirm your settings.
** Click Save.

Wait for the router to reboot.

* Click Finish.

_Note:_ For Remote ACCESS

* Click Advance:
** Firewall ---> Disable the WAN Blocking option
* Click Save

*Note:*
Note: For ACN connection give the static IP ip (Ex:10.20.40.201) in the browser and access the WAN page as remotely and BSNL connection create one IPHost service(for VOIP) and give that IPhost IP (10.20.41.23) in n the browser and access the WAN page as remotely

h3. BSNL


Select WAN Connection Type
* Choose the PPOE
* Update the Username: XXXXXXXXXX
* Update the Password: XXXXXXXXXX
* Click Apply and Save.