FAQ

h1. AONT1443

{{toc}}

h2. Steps:

* Power on the AONT.

* Connect the AONT with a system using an Ethernet patch cable on the *LAN* port of the AONT OR Connect Via AONT_Wifi.

* Open any Internet Browser on the system.

* Type the following IP on the URL *192.168.1.1*.

* In the pop-up window, enter User Name as *admin* and Password as *system*.

* Then the Web interface of the router will allow you to modify and edit the ONT's settings.

*The aboves are the same for both ACN and BSNL setup:*

h3. ACN 

* Select WAN Connection Type

** Choose the static IP 

** Update the IP: 10.20.40.**

** Update the netmast: 255.255.255.0

** Update the Gateway : 10.20.40.1

** Update the Primary DNS: 192.168.8.55

** Update the secondary DNS:192.168.8.56

** Click Next.

* Wireless:

** Network Name(SSID) - ******

** Password - ****** (it should be more than seven characters)

** Click Next.

* Confirm your settings.

** Click Save.

Wait for the router to reboot.

* Click Finish.

_Note:_ For Remote ACCESS

* Click Advance:

** Firewall ---> Disable the WAN Blocking option

* Click Save

*Note:* For ACN connection give the static IP (Ex:10.20.40.201) in the browser and access the WAN page as remotely  and BSNL connection create one IPHost service(for VoIP) and give that IPHost IP (10.20.41.23) in the browser and access the WAN page as remotely

h3. BSNL

Select WAN Connection Type

* Choose the PPOE

* Update the Username: XXXXXXXXXX

* Update the Password: XXXXXXXXXX

* Click Apply and Save.