FAQ

h1. AONT1443

{{toc}}

h2. Steps:

* Power on the AONT.

* Connect the AONT with a system using an Ethernet patch cable on the *LAN* port of the AONT.

* Open any Internet Browser on the system.

* Type the following IP on the URL *192.168.1.1*.

* In the pop-up window, enter User Name as *admin* and Password as *system*.

* Then the Web interface of the router will allow you to modify and edit the Router's settings.

*The aboves are the same for both ACN and BSNL setup:*

h3. ACN 

* Select WAN Connection Type

** Choose the static IP 

** Update the IP: 10.20.40.**

** Update the netmast: 255.255.255.0

** Update the Gateway : 10.20.40.1

** Update the Primary DNS: 192.168.8.55

** Update the secondary DNS:192.168.8.56

** Click Next.

* Wireless:

** Network Name(SSID) - ******

** Password - ****** (it should be more then seven characters)

** Click Next.

* Confirm your settings.

** Click Save.

Wait for the router to reboot.

* Click Finish.

_Note:_ For Remote ACCESS

* Click Advance:

** Firewall ---> Disable the WAN Blocking option

* Click Save

Note: For ACN connection give the static ip (Ex:10.20.40.201) in the browser and access the WAN page as remotely  and BSNL connection create one IPHost service(for VOIP) and give that IPhost IP (10.20.41.23) n the browser and access the WAN page as remotely 

h3. BSNL

Select WAN Connection Type

* Choose the PPOE

* Update the Username: XXXXXXXXXX

* Update the Password: XXXXXXXXXX

* Click Apply and Save.